Siedle Classic
Siedle Classic is a contemporary take on the classic door station. Concentration on the essentials makes this design line the right choice for all those who value the solidity and quality of solid metal.
Solid and high-quality
Spot on: Siedle Classic
Solid metal. Characteristic shape. Intelligent functions.
High-class and robust: PVD coatings
Iridescent copper, noble brass, striking titanium and elegant black – the extremely thin PVD coating emphasises the texture of the Siedle Steel stainless steel. It is scratch-resistant, weather-resistant and easy to clean.
Siedle Classic function modules
The loudspeaker and microphone form the basis of every intercom system. Siedle offers perfect voice quality, even in noisy environments.
Light and call buttons in backlit plastic, made of solid metal with laser lettering or engraving - in black on request.
This camera’s horizontal pick-up angle of 130° is the perfect choice for most standard applications at the entrance.
The camera 180 has a horizontal pick-up angle of 175° allowing it to capture the entire entrance area and offer excellent security.
We add building numbers or individual lettering, such as a company name or opening times, to Siedle Classic using laser technology as standard. Upon request, we can also apply foil lettering or use engraving.
Opens the door or serves as a control centre for everything with a switching function.
Biometric security: Open the door with your own finger. The sensor system can even handle slightly dirty or moist fingers. No usable traces are left behind, fake imprints are rejected.
Access with an electronic key is practical and secure: All you need to do is hold it over the reading field. If you lose it, there’s hardly any cost involved, the user is simply deleted from the system. The passive battery-free transponder technology is reliable and maintenance-free.
Siedle Classic letterboxes
The letterbox systems in the Classic design line are ideal for anyone who values solid metal but does not need the huge level of design freedom afforded by Siedle Steel. Like all Siedle letterboxes, they can be combined with electric functions to create a perfect reception centre at the entrance. Upon request, Classic letterboxes can also be supplied with a handy mail notification system.
The post falls into a shaft and is removed from within the building. The pass-through flap consists of the two-millimetre-thick metal of the front panel. Despite the solid material, the flap is soft-closing, so you can say goodbye to irritating rattling.
Clever construction: The removal door opens to the front rather than to the side; the post is held securely and does not fall to the floor. The pass-through flap and removal door are made of the same material as the front panel.
A simple function. An impressive effect: A light signal on the indoor station indicates that the letterbox’s pass-through flap has been opened and post has arrived. Once the removal door has been opened, the light goes out.
Siedle letterboxes can take on a range of tasks – our delivery box, for example, enables convenient and secure receipt of packages, even when you’re not there.
Materials and colours for Siedle Classic
All Classic door stations have a solid, two-millimetre-thick front panel. The standard version consists of corrosion-resistant V4A stainless steel, left with a natural finish and brushed.
Basic configuration for the front panel: corrosion-resistant V4A stainless steel, left with a natural finish and brushed.
The burnishing , deliberate oxidation, is non-uniform and forms a characteristic patina.
The Classic aluminium front panel is anodised in natural colours or given a robust Duraflon coating.
The Classic front panel paintwork finishes in any RAL colour or with micaceous finish fulfil the highest requirements.
Modern yet timeless: The warm tones of the copper PVD coating. Scratch-resistant and easy to clean.
The brass PVD coating impresses with a perfect surface and brilliant colour quality.
Extremely thin and highly robust: The PVD coating for Siedle Classic in classy black.
Always perfectly powered – line rectifiers from Siedle
Siedle’s intercom systems are as individual as their power requirements. And these are covered by our line rectifiers. Nowadays, new systems are installed in the In-Home bus, so we specifically focus on line rectifiers for this installation technology. You can find an overview of the line rectifiers for the 1+n and 6+n intercom systems as well as for our Siedle Access Professional IP system here .
Our partners in electrical planning and installation will advise you on the right power supply and the corresponding Siedle line rectifiers.
This extremely cost-effective device is standard in the In-Home bus. It supplies audio and video users as well as the door release and nameplate lighting. It is designed for up to eight residential units.
In the classic door intercom system, the Siedle bus line rectifier supplies and controls the door release, nameplate lighting and up to 31 audio users per line. You can have up to 15 lines.
In new and existing systems, our bus video line rectifier serves up to 31 audio and video users per line; with 15 possible lines. An optional video amplifier can be plugged in.
The NG 706 line rectifier supplies additional components and functions, the PSM 1 12 24 supplies individual IQ in-house telephones and bus video panels and the TR 603-0 transformer supplies the door release and nameplate lighting.
Find a specialist dealer
Laser - a perfect match
Typography is part of Siedle system design: Our lettering service guarantees a perfect, consistent look. We offer a high-tech laser process for the metal surfaces of Siedle Classic This is precisely tailored to suit the material in question. Large-scale inscriptions, such as logos are even cheaper with laser lettering than with engraving. Painted and colour anodised surfaces cannot be laser marked for technical reasons, but they can be engraved.
Building numbers, storey designations, street and company names as well as characters and digits on call buttons and letterboxes are lasered as standard. Upon request, foil technology or engraving can also be used.
Names can be added to Siedle Classic call buttons in four ways: Backlit plastic window, lasered metal, engraved metal and also engraved metal filled in black.
Siedle offers the ideal lasering process for almost every metal: gleaming metallic finish for stainless steel, chrome and brass; a premium matte finish for PVD coatings, a bright natural finish on burnished brass and a dark elegant look for aluminium.
Laser lettering also allows individual designs on a space of up to 480 x 800 millimetres. These include company logos, opening times, pictograms, symbols and much more.
Siedle tests, develops and produces special markings with laser technology, such as orientation aids, signage systems, and safety and operating instructions.
Laser technology achieves high contrast and precision. The lettering is easy to read, flush and resists the effects of abrasion and weather. Reorders are delivered within five working days. Existing door stations can be fitted with new lasered call buttons or carrier plates.
Whether it is a name, company, logo or opening times: Siedle can take care of the lettering. The typography is part of the system design, which is why the Siedle lettering service guarantees a perfect look with excellent readability.
In the case of the Siedle Classic door stations, names can be added to call buttons and the building number, for example, can be added to the information field.
